Attributes
| Part Number | TP2509EG |
|---|---|
| Model Code | EG |
Description
- Designed for operations requiring higher impact
- Save on nozzle replacement costs – bodies can be reused, only spray tips are replaced
- Design allows easy tip change out – remove tips by unscrewing the retainer cap
- Flat spray nozzles provide an even edge fan type spray pattern
- Spray angles from 0° to 65°
- Uniform spray distribution across the entire spray pattern and flow rates from .41 to 17.3 gpm (1.5 to 64 lpm)
- Operating pressures from 300 to 3000 psi (20 to 200 bar) –higher than standard tips
- Body assembly consists of high pressure nozzle body, strainer, tip gasket and high pressure tip retainer
**Flow:** As the liquid exits through the rounded U shape of the orifice, it forms into a flat spray pattern. The distribution is even at pressures above 300 psi (20 bar).
Specifications
| Liquid Flow Rate at Rated Pressure | 0.9 gpm @ 40 psi |
|---|---|
| Liquid Pressure Range | 40 - 3,000 psi |
| Liquid Flow Rate (Product Performance) | 0.9 gpm @ 40 psi, 2.5 gpm @ 300 psi, 3.2 gpm @ 500 psi, 3.9 gpm @ 750 psi, 4.5 gpm @ 1,000 psi, 5.5 gpm @ 1,500 psi, 6.4 gpm @ 2,000 psi, 7.1 gpm @ 2,500 psi, 7.8 gpm @ 3,000 psi |
| Tip Type | EG |
| Relative Drop Size Range | 500 - 1,000 µm |
| Rated Pressure | 40 psi |
| Relative Drop Size Group | 500 - 1,000 µm (Moderate Rain) |
| Pressure Group | High Pressure |
| Spray Angle at Rated Pressure | 25° @ 40 psi |
| Spray Angle Range | 25 - 25° |
| Spray Angle Catalog Code | Standard |
| Product Type | Tip |
| Model | EG |
| Liquid Flow Rate Range | 0.9 - 7.8 gpm |
| Brand | UniJet® |
| Inlet Connection Type | Quick-connect |
| Spray Angle (Product Performance) | 25° @ 40 psi |
| Spray Angle | 25° @ 40 psi |
| Spray Pattern | Flat Spray |
| Capacity Size | 09 |
| Mesh Size | 50 |
| Material Composition | Hardened Stainless Steel |
PDF Documents
Catalog Detail: Catalog75 Hydraulic Nozzles US Units UniJet EG
Open PDF