Attributes
| Part Number | 9360-3/8LAP-PP25-50W |
|---|---|
| Model Code | AP-W, LAP-W, LBP-W |
Description
- Hollow cone spray pattern with a circular impact area
- Large, unobstructed flow passages minimize clogging
- Good atomization of liquids at lower pressures – ideal for fluid cooling applications
- Removable caps for easy inspection and cleaning on some models
- Slope-bottom design models reduce the drilling effect of the fluid vortex in the fluid chamber and premature wear
- AX and BX nozzles form smaller drops; ideal for use in air washers and dust suppression applications
- CX, CF, CRC and D nozzles feature higher flow rates; ideal for use in larger, evaporative cooling spray ponds
- AP, LAP and LBP nozzles are constructed of polypropylene and feature excellent corrosion resistance at temperatures up to 160°F (71°C); patented center post design provides extended wear life of the nozzle
- Standard, wide and extra wide spray angles
**Flow:** As liquid enters the nozzle, it passes into a whirlchamber and begins to spin in a circle at high speed. The rotation forces the liquid away from the center toward the edges of the whirlchamber. This causes the liquid to exit the orifice in a hollow cone pattern. Some WhirlJet nozzles have a slope bottom in the whirlchamber that helps extend wear life.
Specifications
| Liquid Flow Rate (Product Performance) | 2.1 gpm @ 3 psi, 2.8 gpm @ 5 psi, 3.3 gpm @ 7 psi, 3.9 gpm @ 10 psi, 5.5 gpm @ 20 psi, 6.8 gpm @ 30 psi, 7.8 gpm @ 40 psi, 9.6 gpm @ 60 psi, 11 gpm @ 80 psi, 12.3 gpm @ 100 psi |
|---|---|
| Spray Angle Catalog Code | Wide |
| Relative Drop Size Group | 500 - 1,000 µm (Moderate Rain), 1,000 - 5,000 µm (Heavy Rain) |
| Weight | 0.6 oz |
| Capacity Size | 25-50W |
| Spray Pattern | Hollow Cone |
| Liquid Flow Rate at Rated Pressure | 3.9 gpm @ 10 psi |
| Spray Angle (Product Performance) | 99° @ 60 psi, 108° @ 20 psi, 110° @ 7 psi |
| Spray Angle | 99° @ 60 psi, 108° @ 20 psi, 110° @ 7 psi |
| Material Code | PP |
| Material Composition | Polypropylene |
| Model | LAP-W |
| Inlet Connection Thread Type | NPT |
| Equivalent Orifice Diameter | 0.406 in |
| Relative Drop Size Range | 500 - 5,000 µm |
| Liquid Pressure Range | 3 - 100 psi |
| Height | 1.6 in |
| Length | 1.91 in |
| Inlet Connection Size | 3/8 in |
| Inlet To Spray Orifice Length | 1.28 in |
| Brand | WhirlJet® |
| Liquid Flow Rate Range | 2.1 - 12.3 gpm |
| Rated Pressure | 10 psi |
| Product Type | Nozzle |
| Spray Centerline Offset From Inlet Centerline | 0.192 in |
| Inlet Centerline To Spray Orifice Height | 1.18 in |
| Inlet Connection Gender | Female |
| Spray Angle Range | 99 - 110° |
| Inlet Connection Type | Threaded (Female NPT) |
| Inlet Diameter Nominal | 0.281 in |