Attributes
| Part Number | 3/8BD-SS10-10W |
|---|---|
| Model Code | BD-W |
Description
- Hollow cone spray pattern
- In-line versions ideal for dust control in mining operations
- BD versions have a lower profile projection for installation in a tee or pipe header
- In-line BDM features recessed orifice area to protect from damage; self-locking cap to prevent loss due to vibration; fiberglass-reinforced nylon inlet body
- BA offset style ideal for installations with physical space limitations
- Spray angles: Standard – 43° to 94°, Wide – 102° to 125°
- Deflected spray versions available with 120°, 150° and 180°included angle of spray at 10 psi (0.7 bar)
- Uniform spray distribution from .11 to 38 gpm (.41 to 145 lpm)
- Operating pressures up to 500 psi (35 bar)
**Flow:** Liquid passes through a hole on the inlet side of the nozzle. The liquid then enters a whirlchamber where it spins in a circle at high speed. The rotation forces the liquid away from the center toward the edges. This causes the liquid to exit the orifice in a hollow cone pattern.
Specifications
| Spray Angle (Product Performance) | 100° @ 80 psi, 111° @ 20 psi, 118° @ 7 psi |
|---|---|
| Spray Angle | 100° @ 80 psi, 111° @ 20 psi, 118° @ 7 psi |
| Material Code | SS |
| Brand | WhirlJet® |
| Rated Pressure | 10 psi |
| Length | 1-1/4 in |
| Inlet Centerline To Spray Orifice Height | 0.266 in |
| Relative Drop Size Group | 100 - 500 µm (Light Rain), 500 - 1,000 µm (Moderate Rain), 1,000 - 5,000 µm (Heavy Rain) |
| Relative Drop Size Range | 100 - 5,000 µm |
| Weight | 1 oz |
| Liquid Flow Rate (Product Performance) | 0.71 gpm @ 5 psi, 0.84 gpm @ 7 psi, 1 gpm @ 10 psi, 1.2 gpm @ 15 psi, 1.4 gpm @ 20 psi, 1.7 gpm @ 30 psi, 2 gpm @ 40 psi, 2.5 gpm @ 60 psi, 2.8 gpm @ 80 psi, 3.1 gpm @ 100 psi |
| Inlet Diameter Nominal | 0.156 in |
| Spray Pattern | Hollow Cone |
| Model | BD-W |
| Spray Angle Catalog Code | Wide |
| Liquid Flow Rate Range | 0.71 - 3.1 gpm |
| Inlet Connection Type | Threaded (Male NPT) |
| Body Hex Size | 11/16 in |
| Inlet Connection Thread Type | NPT |
| Inlet Connection Gender | Male |
| Spray Angle Range | 100 - 118° |
| Capacity Size | 10-10W |
| Inlet Connection Size | 3/8 in |
| Liquid Pressure Range | 5 - 100 psi |
| Equivalent Orifice Diameter | 0.172 in |
| Material Composition | 303 Stainless Steel |
| Liquid Flow Rate at Rated Pressure | 1 gpm @ 10 psi |
| Product Type | Nozzle |
PDF Documents
Catalog Detail: Catalog75 Hydraulic Nozzles US Units Inline Offset Deflected Hollow Cone Nozzles
Open PDF