Attributes
| Part Number | 8686-1/4-SS2-150 |
|---|---|
| Model Code | 8686 |
Description
- Hollow cone spray pattern
- Spray angle at rated pressure (10 psi) is 150°
- Uniform spray distribution from 1.4 to 6.3 gpm
- Operating pressures up to 100 psi
- 1/4 in NPT inlet connection
- Material is 303 Stainless Steel
**Flow:** Liquid passes through a hole on the inlet side of the nozzle. The liquid then enters a whirlchamber where it spins in a circle at high speed. The rotation forces the liquid away from the center toward the edges. This causes the liquid to exit the orifice in a hollow cone pattern.
Specifications
| Spray Angle Catalog Code | Wide |
|---|---|
| Rated Pressure | 10 psi |
| Spray Angle Range | 150 - 150° |
| Liquid Flow Rate (Product Performance) | 1.4 gpm @ 5 psi, 2 gpm @ 10 psi, 2.8 gpm @ 20 psi, 4 gpm @ 40 psi, 4.9 gpm @ 60 psi, 5.6 gpm @ 80 psi, 6.3 gpm @ 100 psi |
| Weight | 1 oz |
| Relative Drop Size Group | 500 - 1,000 µm (Moderate Rain), 1,000 - 5,000 µm (Heavy Rain) |
| Relative Drop Size Range | 500 - 5,000 µm |
| Material Code | SS |
| Spray Pattern | Hollow Cone |
| Spray Angle at Rated Pressure | 150° @ 10 psi |
| Brand | DeflectoJet® |
| Capacity Size | 2 |
| Product Type | Nozzle |
| Model | 8686 |
| Inlet Connection Gender | Male |
| Liquid Flow Rate Range | 1.4 - 6.3 gpm |
| Length | 1.31 in |
| Inlet Connection Thread Type | NPT |
| Liquid Pressure Range | 5 - 100 psi |
| Spray Angle (Product Performance) | 150° @ 10 psi |
| Spray Angle | 150° @ 10 psi |
| Inlet Connection Type | Threaded (Male NPT) |
| Liquid Flow Rate at Rated Pressure | 2 gpm @ 10 psi |
| Body Hex Size | 5/8 in |
| Inlet Connection Size | 1/4 in |
| Material Composition | 303 Stainless Steel |
PDF Documents
Catalog Detail: Catalog75 Hydraulic Nozzles US Units DeflectoJet 8686
Open PDF