Attributes
| Part Number | TG-0.7 |
|---|---|
| Model Code | TG |
Description
- Quick-connect nozzles reduce maintenance time –bodies remain on pipe/header
- Save on nozzle replacement costs – bodies can be reused, only spray tips are replaced; tips fit on male or female bodies
- Solid cone-shaped spray pattern with round impact area or cone-shaped spray pattern with square-like impact area for coverage of rectangular areas or spray zones
- Spray angles: Standard – 43° to 91°, Wide – 112° to 120°
- Uniform spray distribution from .08 to 7.4 gpm (.3 to 28 lpm)
- Operating pressures up to 300 psi (20 bar)
**Flow:** As the liquid enters the nozzle, it passes through an internal strainer and into the slotted core where the swirling begins. The swirling continues as the liquid passes through a disc. The breakup of the liquid occurs as it exits the orifice, producing a well-defined cone pattern. The drops are uniform in size and distributed equally throughout the spray pattern.
Specifications
| Liquid Flow Rate Range | 0.096 - 0.24 gpm |
|---|---|
| Product Type | Tip |
| Spray Angle (Product Performance) | 54° @ 20 psi, 63° @ 80 psi |
| Spray Angle | 54° @ 20 psi, 63° @ 80 psi |
| Liquid Flow Rate at Rated Pressure | 0.07 gpm @ 10 psi |
| Relative Drop Size Group | 100 - 500 µm (Light Rain), 500 - 1,000 µm (Moderate Rain) |
| Liquid Flow Rate (Product Performance) | 0.096 gpm @ 20 psi, 0.13 gpm @ 40 psi, 0.18 gpm @ 80 psi, 0.2 gpm @ 100 psi, 0.24 gpm @ 150 psi |
| Material Composition | Brass |
| Spray Angle Range | 54 - 63° |
| Maximum Free Passage Diameter | 0.02 in |
| Spray Angle Catalog Code | Standard |
| Inlet Connection Type | Quick-connect |
| Brand | UniJet® |
| Capacity Size | 0.7 |
| Model | TG |
| Relative Drop Size Range | 100 - 1,000 µm |
| Liquid Pressure Range | 20 - 150 psi |
| Equivalent Orifice Diameter | 0.03 in |
| Tip Type | TG |
| Spray Pattern | Full Cone |
| Rated Pressure | 10 psi |
PDF Documents
Catalog Detail: Catalog75 Hydraulic Nozzles US Units FullJet TG TG-W TH-W
Open PDF