Attributes
| Part Number | 1/4TT+D3-33SS |
|---|---|
| Model Code | D Spray Tip + T(T) Body |
Description
- Quick-connect nozzles reduce maintenance time –bodies remain on pipe/header
- Save on nozzle replacement costs – bodies can be reused, only spray tips are replaced; tips fit on male or female bodies
- Solid cone-shaped spray pattern with round impact area or cone-shaped spray pattern with square-like impact area for coverage of rectangular areas or spray zones
- Spray angles: Standard – 43° to 91°, Wide – 112° to 120°
- Uniform spray distribution from .08 to 7.4 gpm (.3 to 28 lpm)
- Operating pressures up to 300 psi (20 bar)
**Flow:** As the liquid enters the nozzle, it passes through an internal strainer and into the slotted core where the swirling begins. The swirling continues as the liquid passes through a disc. The breakup of the liquid occurs as it exits the orifice, producing a well-defined cone pattern. The drops are uniform in size and distributed equally throughout the spray pattern.
Specifications
| Body Type | TT |
|---|---|
| Inlet Connection Gender | Male |
| Liquid Flow Rate Range | 0.15 - 0.76 gpm |
| Spray Angle at Rated Pressure | 54° @ 40 psi |
| Orifice Disc Number And Core Number | D3-33 |
| Liquid Flow Rate (Product Performance) | 0.15 gpm @ 10 psi, 0.21 gpm @ 20 psi, 0.29 gpm @ 40 psi, 0.41 gpm @ 80 psi, 0.45 gpm @ 100 psi, 0.55 gpm @ 150 psi, 0.63 gpm @ 200 psi, 0.76 gpm @ 300 psi |
| Body Sales Part Number | 1/4TT |
| Spray Angle (Product Performance) | 48° @ 20 psi, 54° @ 40 psi, 57° @ 80 psi |
| Spray Angle | 48° @ 20 psi, 54° @ 40 psi, 57° @ 80 psi |
| Inlet Connection Type | Threaded (Male NPT) |
| Rated Pressure | 40 psi |
| Spray Pattern | Full Cone |
| Weight | 1.9 oz |
| Relative Drop Size Range | 100 - 1,000 µm |
| Material Code | SS |
| Tip Type | D UniJet Full Cone |
| Product Type | Nozzle Assembly |
| Inlet Connection Thread Type | NPT |
| Relative Drop Size Group | 100 - 500 µm (Light Rain), 500 - 1,000 µm (Moderate Rain) |
| Length | 1-1/2 in |
| Tip Sales Part Number | D3-33SS |
| Inlet Connection Size | 1/4 in |
| Material Composition | Brass (Body), 303 Stainless Steel (Disc/Core) |
| Capacity Size | D3-33 |
| Brand | UniJet® |
| Spray Angle Range | 48 - 57° |
| Body Hex Size | 13/16 in |
| Model | D Spray Tip + T(T) Body |
| Liquid Pressure Range | 10 - 300 psi |
| Liquid Flow Rate at Rated Pressure | 0.29 gpm @ 40 psi |
| Spray Angle Catalog Code | Standard |
| Equivalent Orifice Diameter | 0.047 in |
PDF Documents
Catalog Detail: Catalog75 Hydraulic Nozzles US Units FullJet D Spray Tip
Open PDF