Attributes
| Part Number | TJ180-3-601-B33-V2B |
|---|---|
| Model Code | TJ180 |
Description
This unit provides concentrated, high-impact cleaning of hard-to-remove residues. It is ideal for open-top tanks, adhesive tanks, food processing tanks, paint tanks, petrochemical / chemical tanks, processing tanks and sludge / wastewater tanks.
- Customizable — can be used for high-concentration chemical recirculation cleaning or low-pressure, high-volume cleaning.
- Food-grade, oil-lubricated or flow-through gearbox designs are fluid-driven and ideal for open-top tanks; a built-in strainer minimizes clogging.
- Global field support through dedicated sales engineers in more than 80 countries.
- Nozzles rotate on multiple axes, creating a crisscross pattern to thoroughly clean tanks and remove the stickiest of residues.
- Concentrated cleaning stream effectively cleans bottom and shadow areas of tanks, outperforming other fluid-driven tank cleaners.
- All units are built-to-order and lightweight for easy portability.
- [Learn about maintenance services to keep Cloud-Sellers® Tank Cleaners running at peak performance](https://www.spray.com/services/preventative-maintenance-service)
Specifications
| Model | TJ180 |
|---|---|
| Spray Coverage | 180° |
| Gear Ratio | 655:1 |
| Brand | Cloud-Sellers® |
| Minimum Tank Opening | 12.2 in |
| Product Type | Nozzle |
| Gearbox Type | Flow-Thru |
| Impact Group | High Impact |
| Hub Connection Type | 3 nozzle hub |
| Inlet Connection Thread Type | BSPT |
| Nozzle Size | .281 |
| Liquid Flow Rate Range | 30 - 300 gpm |
| Inlet Connection Type | Threaded (Female BSPT) + Quick-Disconnect (Male) |
| Operating Principle | Fluid-driven Turbine |
| Material Composition | Gears – 17-4PH stainless steel, O-rings – self-lubricating EPDM or Viton, Seals – high-performance spring-energized PTFE, Gear shaft bearing system – PTFE or oilite bearing, All other metallurgy – 316 stainless steel or Viton |
| Operating Pressure Range | 40 - 350 psi |
| Maximum Temperature | 250 °F |
| Stator Type | Low Pressure |
| Gearbox Bearings | Rulon LR |
| Inlet Stem | 2.5 in. Quick-Disconnect (Male) and 2 in. BSPT (Female) |
| Nozzle Count | 3 |
| Maximum Recommended Tank Diameter | Up to 80 ft |
| Tank Mounting Options | Vertical/Downward, Vertical/Upward, Horizontal, 45° Upward, 45° Downward |
| Recommended Strainer Mesh | 20 |
| Nozzle Hub Drive | Clutch + Self Rinse |
| Maximum Free Passage | 840 µm |
| O-Ring | Viton® |
| Inlet Connection Size | 2 in |