Miner WhirlJet® Nozzle, Nylon & Brass, 3/8BDM-2

- Hollow cone spray pattern - In-line versions ideal for dust control in mining operations - BD versions have a lower profile projection for installation in a tee or pipe header - In-line BDM features recessed orifice area to protect from damage; self-locking cap to prevent loss due to vibration; fiberglass-reinforced nylon inlet body - BA offset style ideal for installations with physical space limitations - Spray angles: Standard – 43° to 94°, Wide – 102° to 125° - Deflected spray versions available with 120°, 150° and 180°included angle of spray at 10 psi (0.7 bar) - Uniform spray distribution from .11 to 38 gpm (.41 to 145 lpm) - Operating pressures up to 500 psi (35 bar) **Flow:** Liquid passes through a hole on the inlet side of the nozzle. The liquid then enters a whirlchamber where it spins in a circle at high speed. The rotation forces the liquid away from the center toward the edges. This causes the liquid to exit the orifice in a hollow cone pattern.